Sazinies ar mums
The ADJ VF Volcano is a compact and affordable vertical Fog Machine that mixes color into the fog from 6x 3-Watt RGB LEDs. With new advances in ADJ’s heater technology, the VF Volcano produces a dry even blast of fog over 15 feet (4.5 meters) in the air. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance Italian pump system for optimum output. ADJ’s Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with short warm-up time between fog blasts. Multiple VF Volcano's can be triggered with one remote control The VF Volcano should only be used in a position so fog is shooting upright. The ADJ VFV-WR wireless remote comes included with the VF Volcano.
Specifications
- 750W professional vertical Fog Machine with 6 x 3-Watt LEDs
- High performance pump for optimum output
- ADJ’s Electronic Thermo Sensing (ETS) technology
- Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
- 2 Operational modes: Manual & Remote Control
- Convenient carrying handle
- Low Fluid LED Indicator on rear
- Warm-up time: 6 min
- Output time: 8 seconds (max)
- Re heat interval: 9.3 seconds(Average )
- Built-In, non-removable fog fluid tank: 1 Liter
- Fog Output: 8,000 (cu.ft/min)
- Fluid consumption:14ml/min
- Included Accessory: VFV-WR wireless remote to trigger color/fog output on one or multiple VF Volcano's
- Power Connection: IEC AC In
- Only use high quality, water-based fog fluid, for optimum result, use ADJ Fog Juice CO2
- Light Source: 6 x 3-Watt LEDs, (2 Red, 2 Green, & 2 Blue LEDs)
- Heater: 750W
- Voltage: AC 120V or 240 50/60Hz (non switching)
- Power Consumption: 770W
- Dimensions (LxWxH): 327 x 212 x 177mm
- Weight: 3.36 kg.
Dūmu mašīnas | |
Jauda, W | 750 |
Veids | CO2 |
Unlimited Tabs or Accordions or open Blocks with any HTML content or the builder interface (supporting custom rows/columns/modules).
Each individual tab module can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.