IK MULTIMEDIA iRig Pro DUO

Specs

iRig Pro Duo Specifications

Microphone Input

Microphone Input: 2x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground

Microphone Input Level: from 6 mVpp to 1.4 Vpp

Microphone Input Impedance: approx 2 kOhms

Gain Range: 48 dB

Phantom Power: +48V ± 4V

Frequency Response:

• from 5 Hz to 21 kHz (-3dB) Gain @ min

• from 30 Hz to 21 kHz (-3dB) Gain @ max

Input Noise: -103 dB(A) Gain @ min

-86 dB(A) Gain @ max

Instrument Input

Instrument Input: 2x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground

Instrument Input Level: from 30 mVpp to 6.9 Vpp

Instrument Input Impedance: 1 MOhms

Gain Range: 27 dB

Frequency Response:

• from 2 Hz to 21 kHz (-3dB) Gain @ min

• from 5 Hz to 21 kHz (-3dB) Gain @ max

Input Noise:

• -104 dB(A) Gain @ min

• -102 dB(A) Gain @ max

Line Output

Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground

Floating Balanced Outputs with automatic level compensation when working in unbalanced mode

Maximum Output Level: +16 dBu into 600 Ohms balanced load

Frequency Response: from 10 Hz to 21 kHz (-3dB)

Output Dynamic Range: 106 dB(A)

Output Impedance: 150 Ohms balanced

Common

AD and DA Resolution: 24-bit

Sampling Rate: 44.1 kHz and 48 kHz

Power: USB bus power, battery power (2xAA - included), or DC power supply (9VDC, from 500mA up, positive outside - not included)

Metering: Multicolor LED)

Size: 75mm/2.95" x 127mm/5" x 37mm/1.46"

Weight: 197.2g/6.96oz (batteries excluded)

Battery Life:

• Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)

• Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)

*Max load condition: both inputs connected to two 1,5mA phantom powered loads, input gains set to maximum, outputs set to maximum.

**Min load condition is as follows: music playing, phantom power OFF.

Package includes

iRig Pro Duo universal dual channel Audio-MIDI interface

Lightning to Mini-DIN connection cable (60cm/23.62")

Micro-USB-OTG to Mini-DIN connection cable (60cm/23.62")

USB to Mini-DIN connection cable (60cm/23.62")

2 x 2.5mm jack to MIDI cable (160cm/63")

2 x 1.5V AA Battery

Dimensions

Size: 75mm/2.95" x 127mm/5" x 37mm/1.46"

Weight: 197.2g/6.96oz (batteries excluded)

Lightning to Mini-DIN connection cable: 60cm/23.62"

Micro-USB-OTG to Mini-DIN connection cable: 60cm/23.62"

USB to Mini-DIN connection cable: 60cm/23.62"

2.5mm jack to MIDI cable: 160cm/63"

Requirements

iOS Devices

Compatible with iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required.

Also compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus and iPhone 7.

Computers

Mac®: Mac OS X 10.6 or later. One free USB port.

Windows®: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio. See our FAQ here for further details.)

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.