IK MULTIMEDIA iRig Pre HD

Specs

iRig Pre HD Specifications

Microphone Input

Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground

Microphone Input Level: from 6 mVpp to 1.4 Vpp

Microphone Input Impedance: 2 kOhms

Gain Range: 40 dB

Phantom Power: +48V ± 4V

Frequency Response: 20 Hz - 20 kHz +/-1.5dB

Input Noise: -97 dB RMS, -105 dB(A)

Stereo Headphone Output

Connector: 1/8” TRS Jack. Tip: right / Ring: left / Shield: ground

Headphone Level Control numbered thumbwheel

Headphone Level Power 100mW into 50 Ohms

Other Input/Output

Device Connector: micro-USB

Common

Conversion: 24-bit A/D, 24-bit D/A

Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:

• USB bus powered when used with a computer

• Battery powered (2xAA included) needed for +48V phantom only

Package includes

iRig Pre HD

Lightning to micro-USB cable

USB to micro-USB cable

2 x 1.5V AA battery

Velcro strip

Dimensions

Size: 40mm/1.57" x 110mm/4,33" x 34mm/1.34"

Weight: 75g/2.65oz (batteries excluded)

Cables lenght: 60cm/23.62"

Compatibility

iOS Devices

Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required.

Also compatible with all newer iPhone, iPad and iPod touch models.

Computers

Mac®: macOS® 10.6 or later. One free USB port.

Windows®: One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

image

Android Devices

Compatible with Android devices running Android 5 or later and with USB digital audio capabilities.

Micro-USB-OTG to Micro-USB cable (sold separately) is required.